AutoCAD Tip: Mastering AutoCAD STRETCH for Precise Geometry Editing

November 19, 2026 2 min read

AutoCAD Tip: Mastering AutoCAD STRETCH for Precise Geometry Editing

The STRETCH command is one of AutoCAD’s most useful editing tools when geometry must change size or position while preserving its intended shape. Unlike SCALE, which enlarges or reduces an entire selection proportionally, STRETCH moves only the vertices and endpoints captured by a crossing selection. Used correctly, it lets you lengthen walls, revise openings, adjust details, and accommodate design changes without redrawing objects.

Start the command by typing STRETCH or S, then create a crossing window from right to left. The direction matters:

  • Crossing selection: Selects objects that are completely inside the window plus objects crossed by its boundary.
  • Window selection: A left-to-right window selects only fully enclosed objects and generally will not produce the expected stretching result.
  • Crossing polygon: Use CP at the selection prompt for irregular areas where a rectangular window is too limiting.

The key principle is simple: only the portions of objects intersected by the crossing selection are stretched. For example, to make a rectangular room wider, draw a narrow right-to-left crossing window over the two corners on one side of the room. Specify a base point, then enter a displacement or select a new point. AutoCAD moves the selected corners while retaining the connected lines, so the room becomes wider rather than distorted.

For predictable results, use precise coordinate entry. After choosing the base point, enter a relative displacement such as @24,0 to stretch 24 drawing units horizontally, or use polar input such as @12<90 to move geometry vertically. Turn on Ortho Mode with F8 when the edit must remain horizontal or vertical. Object snaps, particularly Endpoint, Midpoint, and Intersection, help establish reliable base points and target locations.

STRETCH works especially well with:

  • Lines and polylines: Endpoints and vertices move while maintaining connected geometry.
  • Arcs: Stretching an endpoint can modify the arc while preserving its relationship to adjacent objects.
  • Hatches: Associative hatches update when their boundary is stretched.
  • Blocks: A block reference moves only when fully selected; it does not partially stretch unless it has been designed as a dynamic block with a stretch action.
  • Dimensions: Associative dimensions can update after geometry changes, though dimensions should always be reviewed before issuing drawings.

Avoid selecting more geometry than necessary. If the crossing window touches objects that should remain fixed, those objects may be altered unexpectedly. Layers can help: lock reference layers, temporarily isolate the working layer, or use selection cycling in dense drawings. Before confirming the new location, observe AutoCAD’s dynamic preview to verify that the intended endpoints—not entire objects—are moving.

A practical workflow is to zoom into the edit area, activate OSNAP and Ortho as needed, use a tight right-to-left crossing window, and enter an exact displacement. This approach is faster and safer than manually trimming, extending, and redrawing multiple objects after every revision.

For teams standardizing efficient drafting workflows, explore professional AutoCAD software and resources from NOVEDGE. Combining disciplined STRETCH selections with accurate coordinate input helps keep revisions clean, connected, and ready for documentation.



You can find all the AutoCAD products on the NOVEDGE web site at this page.







Also in Design News

Subscribe

How can I assist you?