Your Cart is Empty
Get a Personalized Quote×
|
|
|
What's New
|
What's included
AudioDenoise
AudioDenoise automatically removes hiss, background noise, and hum from your audio.
FEATURES
Remove hiss, background noise, and hum from your audio – right inside Premiere, FCP, Audacity, Logic, GarageBand, Audition, and DaVinci Resolve.
- Powerful new AI audio denoiser
- Removes room noise, hum, and complex noise
- Easy – just drag, drop, and adjust
|
EASY – JUST DRAG AND DROP
AudioDenoise is simple to use. Just drag the denoise plugin onto your audio, adjust the “Strength” knob to denoise audio, and that’s it. AudioDenoise is designed for video editors, podcasters, and anyone else who needs a high-quality result fast. |
WindRemover
WindRemover is a plugin for removing wind noise from your videos and podcasts.
FEATURES
WindRemover by CrumplePop is a plugin that uses AI to remove wind noise from your audio – right inside Premiere, FCP, Audacity, Logic, GarageBand, Adobe Audition, and DaVinci Resolve.
- Automatically removes low and high frequency wind noise
- Rescue interviews, dialogue, and vocals that would be unusable
- Advanced AI with realtime playback
|
AUTOMATICALLY REMOVE WIND NOISE Wind noise is a notorious problem. Any time you shoot video or record audio outdoors – even if you’re using a physical windscreen mounted on the mic – your audio can be ruined by even a small amount of wind. WindRemover intelligently targets and removes only wind noise, leaving the voice intact. ADVANCED AI Wind noise is automatically identified and removed, and voices sound more natural. Almost magically, the plugin can remove simultaneous low, mid, and high frequency wind noise. You can also apply CrumplePop AudioDenoise along with WindRemover to clean up both wind noise and other background noise in the same clip. |
PopRemover
PopRemover is a plugin for removing plosive sounds from your videos and podcasts.
FEATURES
PopRemover by CrumplePop is a plugin that removes plosive noises from your audio – right inside Premiere Pro, FCP, Audacity Logic Pro, GarageBand, Adobe Audition, and DaVinci Resolve
- Automatically removes plosive noises
- Advanced AI with realtime playback
- Simple UI, easy to use
|
POP REMOVER
Plosive noises are caused by a blast of air hitting the microphone, often after sounds like “p” and “b”. It sounds like someone has bumped into the mic, and it’s a common problem in podcasts and voiceovers. PopRemover intelligently targets and removes only this problematic plosive noise, leaving the voice intact. ADVANCED AI If you are an experienced audio engineer, you can carefully work on each plosive noise and try to improve it. But it is a time-consuming process. PopRemover AI 2 uses AI to remove these plosive noises automatically. |
RustleRemover
Rustle Remover is a plugin for lavalier microphone noise cancellation.
FEATURES
RustleRemover by CrumplePop is a plugin that removes lapel microphone noise from your audio – right inside Premiere, FCP, Audacity, Logic, GarageBand, Adobe Audition, and DaVinci Resolve
- Automatically removes lavalier microphone noise
- Advanced AI with realtime playback
- Simple UI, easy to use
|
AUTOMATICALLYREMOVE RUSTLE NOISE FROM LAPEL MICS
Lapel microphone rustle noise is a common problem. It’s something you hear all the time with collar mics – if the speaker moves or brushes against the microphone at all, there is a loud and distracting rustle sound. RustleRemover intelligently targets and removes only lav mic rustle noise, leaving the voice intact. ADVANCED AI Even for an experienced audio engineer, lav mic rustle noise during speech is extremely difficult to remove. Conventional audio software tools are simply not designed for this type of noise cancellation. RustleRemover uses AI to get rid of this noise automatically. |
TrafficRemover
TrafficRemover is a plugin for removing car traffic noise from videos and podcasts.
FEATURES
TrafficRemover by CrumplePop is a plugin that uses AI to remove automobile traffic noise from your audio – right inside Premiere, FCP, Audacity, Logic, GarageBand, Adobe Audition, and DaVinci Resolve.
- Automatically identifies and removes traffic noise
- Rescue interviews, dialogue, and vocals that would be unusable
- Advanced AI with realtime playback
|
AUTOMATICALLY REMOVE TRAFFIC NOISE
Almost any time an interview, podcast, or vlog is recorded outdoors, you have to contend with traffic noise. Even when audio has been recorded indoors, traffic noise from an open window can add a distracting level of background noise. TrafficRemover intelligently identifies car, bus, and truck traffic noise and removes it. ADVANCED AI TrafficRemover uses AI to automatically identify and remove car traffic noise from your audio, leaving voices sounding natural. TrafficRemover removes a wide variety of traffic noise very effectively – whether it’s a car passing nearby or ambient road noise in the distance. |
ClipRemover
ClipRemover is a plugin for restoring clipped audio in videos and podcasts.
FEATURES
ClipRemover by CrumplePop is a plugin that uses AI to restore clipped areas of your audio – right inside Premiere, FCP, Audacity, Logic, GarageBand, Adobe Audition, and DaVinci Resolve.
- Automatically reconstructs clipped areas of the waveform
- Rescue interviews, dialogue, and vocals that would be unusable
- Advanced AI with realtime playback
|
AUTOMATICALLY RESTORE CLIPPED AUDIO
It’s a common problem – when part of your audio has been recorded too loud, it “clips” and sounds distorted. If you look at the waveform, you’ll see that the clipped area is cut off on the top: That part of your audio is literally gone. ClipRemover intelligently identifies these clipped areas and restores them, reducing the clipping artifacts and giving you audio that sounds natural. ADVANCED AI ClipRemover uses AI to reconstruct clipped areas of the waveform. Almost magically, ClipRemover can bring back natural-sounding voice where before there had only been distorted, clipped audio. |
Levelmatic
Levelmatic is a plugin for automatically leveling audio in videos and podcasts.
FEATURES
Levelmatic by CrumplePop is a plugin that automatically levels your audio – right inside FCP, Premiere Pro, Audition, Resolve and more.
- Fix audio that is too loud or too quiet
- Go beyond compressors and limiters
- Save time – no more keyframing
|
FIX AUDIO THAT IS TOO LOUD OR TOO QUIET
It’s a common problem – your audio sounds fine, but then the speaker moves away from the microphone, and it’s too quiet. Or maybe you have two people being interviewed, and one of them is located farther away from the microphone. Levelmatic automatically detects areas of your audio that are too quiet or too loud, and fixes them. GO BEYOND COMPRESSORS AND LIMITERS Compressors and limiters are great tools, but it takes a lot of skill and time to get natural-sounding results from them. Levelmatic isn’t a compressor or a limiter – it combines the functions of both, and it does so intelligently. Just set your target output level, and then adjust the Strength knob. Levelmatic adjusts levels as it goes, keeping the natural dynamics of speech intact. |
EchoRemover
EchoRemover is a plugin for removing echo and reverb from your videos and podcasts.
FEATURES
EchoRemover by CrumplePop is an echo removal plugin that uses AI to remove echo from your audio – right inside Premiere Pro, Audacity, FCP, Logic, GarageBand, Adobe Audition, and DaVinci Resolve.
- Automatically remove audio echo and reverb
- Rescue interviews, dialogue, and vocals that would be unusable
- Easy – just drag and drop
|
KEEP ECHO FROM WRECKING YOUR VIDEO OR PODCAST
Reverb is distracting and creates distance between the speaker and the audience. If your audio was recorded in a space with room echo, it can make your entire video or podcast sound unprofessional. EchoRemover by CrumplePop automatically removes room echo from your audio, leaving the voice sounding clear and natural. RESCUE AUDIO RECORDED AT HOME Was your audio recorded in a home office that sounds hollow? Unfortunately, even a nice microphone can’t fix this problem. EchoRemover can quickly and easily rescue this audio. Just drag and drop EchoRemover onto your audio and the room echo is removed. |
Sound App
Plus Crumplepop also comes with Sound App Pro, a simple desktop app for Mac and Windows that puts all CrumplePop audio tools in one handy interface.
| Drag, drop, and fix your audio. SoundApp is perfect if you don’t have time for plugins and complicated editing applications. Every CrumplePop audio tool in one desktop app Super simple UI, easy to use Advanced AI with realtime playback Remove the Noise & Fix your Levels Echo, fan noise, mic bumps, electrical hum. Even wind noise. SoundApp removes problem noise in seconds. Are some parts of your audio too quiet, while others are too loud? SoundApp sets all your levels for you. Just drop in your video or podcast, adjust some simple controls, and you’re done. Simple App for Mac and Windows |
Instead of spending weeks learning a complicated audio or video editor and trying to make sense of plugins, you can get professional-sounding audio in minutes by using SoundApp. SoundApp is a simple desktop app for Mac and Windows. If you just want to get your video or podcast sounding great quickly, then SoundApp should be perfect.
Adavced AI
Next-generation technology allows you to quickly make audio repairs that would have been difficult or impossible using traditional tools. CrumplePop intelligently targets and removes problem noise, leaving the voice signal intact.
Requirements
SYSTEM REQUIREMENTS
Mac or PC.
VST3 and AU plugins for Premiere Pro, Audition, Final Cut Pro, DaVinci Resolve, Garageband, Logic, and more.
Plus a standalone desktop app.