Authorized Reseller
SKU 13003
PTC Creo Simulation Extension
Floating License w / 1‑Year Gold Support
4,795
List Price
6,800
You Save
2,005
Best Web PriceDigital Delivery
Available in USA only
MPN PTN-3223-F
PTC Creo ParametricPTC Creo ParametricPTC Creo Simulation Extension - Floating License w/ 1-Year Gold SupportPTC Creo Simulation Extension - Floating License w/ 1-Year Gold SupportSimulate Real-World Stresses on Your Product. Includes required 1st year Support.PTN-3223-F4,795.00Novedge+1 (415) 848 9018
StoreFeatured BrandsPTC Creo ParametricPTC Creo Simulation Extension

PTC Creo Simulation Extension
Floating License w/ 1-Year Gold Support

OverviewSpecsFloating Lic.
PTC Creo Simulation Extension -- Floating License w/ 1-Year Gold Support

Simulate Real-World Stresses on Your Product. Includes required 1st year Support.

PTC Creo Simulation Extension Floating License w/ 1-Year Gold Support gives designers and engineers the power to evaluate structural and thermal product performance on your digital model before resorting to costly, time-consuming physical prototyping. By gaining early insight into product behavior, you can greatly improve product quality while saving time, effort and money.
The software has the same user interface, workflow and productivity tools that are standard throughout the PTC Creo Parametric Creo family. It is available as a standalone application or as an extension of PTC Creo Parametric.

Features and Specifications

Analysis Capabilities
  • Linear Static Structural Analysis
  • Static Structural Analysis with Small Displacement Contact
  • Modal Structural Analysis
  • Linear Buckling Structural Analysis
  • Linear Steady State Thermal Analysis
  • FEM mode: Use of NASTRAN solver
  • - Linear Static Structural Analysis
    - Modal Structural Analysis
  • FEM mode: Use of ANSYS solver
  • - Linear Static Structural Analysis
    - Modal Structural Analysis
    - Linear Steady State Thermal Analysis
  • Fatigue (optional module)
Convergence
  • P-type Finite Element methodology
  • Single Pass Adaptive
  • Multi-Pass Adaptive
  • User control on convergence criteria
  • Automatic sizing and special treatment of elements near singularities
Design Studies
  • Parameters as independent variables of the Design Study
  • - Load and Constraint values
    - Material, beam, spring, mass, shell properties
    - CAD model parameters
    - CAD model dimensions
    - General parameters through user defined relations
  • PTC Creo Simulate Measures as dependent variables of the design study
  • Local Sensitivity
  • Global Sensitivity
  • Optimization
General Modeling Tools
  • Units Manager
  • - Commonly used units for all quantities available
    - Creation of custom units and unit systems
    - Model definition in user selected units
    - Results in user selected units
  • Material Library
  • - Typical metals and plastics included
    - Storage of user defined materials
    - Departmental or company material libraries
  • Coordinate Systems
  • - History-based, associative, parametric features
    - User defined Cartesian, Cylindrical or Spherical coordinate systems
  • Function Manager
  • - Quantity dependence on space, temperature, time, frequency, measure
    - Symbolic
    - Tabular
    - Interpolated over geometry
  • Process Guide
  • - Model definition by user defined HTML templates
    - UI access through hyperlinks
Structural Boundary Conditions
  • Boundary Conditions specified on geometry
  • Enforced Translations and Rotations
  • Mirror and Cyclic Symmetry Constraints
  • Planar, Pin and Ball Constraints
  • Force and Moment Loads
  • - Specified in terms of total or density value
    - Uniform or spatially varying
    - Static equivalents to point loads
  • Pressure Loads
  • Bearing Loads
  • Gravity Loads
  • Centrifugal Loads specified by the angular velocity or angular acceleration of the structure
  • Inertial Loads
  • Loads imported from PTC Creo Mechanism Analysis
  • Temperature Loads
  • - Uniform or spatially varying
    - Temperature fields calculated by a PTC Creo Simulate Thermal Analysis
    - Imported External Temperature fields
Thermal Boundary Conditions
  • Boundary Conditions specified on geometry
  • Prescribed Temperatures
  • - Uniform or spatially varying
  • Convection Conditions
  • - Uniform or spatially varying
    - Imported External Fields
  • Cyclic Symmetry constraints
  • Heat Loads
  • - Specified in terms of total or density value
    - Uniform or spatially varying
Materials
  • Isotropic Material Properties assigned to geometry
  • Isotropic Material Failure Limits:
  • - Supported Criteria: Modified Mohr, Maximum Shear Stress (Tresca), Distortion Energy (von Mises)
  • Temperature dependent material structural properties
Element Types and Idealizations
  • Continuum elements: Bricks, Wedges, Tetrahedra
  • 3D Shells: quadrilateral, triangular
  • Automatic and semi-automatic Compression of solid geometry to surfaces for Shell modeling
  • Curved Beams
  • - Along Curve or Point-Point
    - General Beam Section editor, including parametric Sketched Sections
    - General specification of Beam Section Orientation
    - Beam Releases
  • Constant Stiffness Springs
  • - Point-to-Point or Point-to-Ground
    - Extensional and Rotational stiffness
  • Concentrated Masses
Meshing Tools
  • Surface Regions - History-based, associative, parametric features
  • Volume regions

  • - History-based, associative, parametric features
    - Defined as Extrudes, Revolves, Sweeps, Helical Sweeps, Blends, Rotational Blends, Swept Blends or based on Quilts
  • Fully Automatic Mesh Generation
  • - Controls through Maximum or Minimum Element Size, Point Density, Hard Points, Hard Curves
    - Automatic cleanup of CAD geometry defects
Connections
  • Contact Interfaces
  • - Surface-Surface or Component-Component
    - Frictionless
    - Infinite Friction with Slippage Indicators
    - Press-fit
  • Fasteners

  • - Bolts or Screws
    - Connecting Solids or Shells
    - Preload
  • End Welds
  • Perimeter Welds
  • Spot Welds
  • Automatic import and modeling of PTC Creo Parametric Weld Features
  • Rigid Links
Results
  • Multiple Result Window display
  • Saved Result Window definitions
  • Result Window Templates
  • Full Results post-processing
  • - On full model or selected geometry
    - Fringes, Contours, Cutting / Capping Surfaces, Iso-surfaces
    - Vector Plots
    - Graphs vs. Coordinates or Along Curve
    - Measure Graphs vs. Parameter, Optimization step
    - Animation
  • Results recorded as Measures
  • - At Point
    - Maximum / Minimum Over Model
    - Maximum / Minimum over Selected Geometry
    - Functions of Measures
  • Linearized Stress report
  • HTLM report
  • Export Formats
  • - PTC Creo View
    - VRML
    - mpg, avi
    - Graph Tables
    - Excel
Process Tools
  • PTC Creo Simulation Extension Model is an integral part of CAD model and fully supported by PTC Windchill
  • Results optionally uploaded to PTC Windchill and automatically associated to the model
  • Distributed batch processing across multiple compute servers
Language Support
  • English
  • German
  • French
  • Japanese
  • Russian
  • Simplified Chinese

This Bundle Includes

PTC Creo Parametric
PTC Creo Simulation Extension
1-Year Gold Support for Floating License
The standard level of service for all Maintenance Support customersThis item cannot be purchased separately.13001
+
PTC Creo Parametric
PTC Creo Simulation Extension
Floating License
Simulate Real-World Stresses on Your ProductThis item cannot be purchased separately.12706

Installation Requirements

In order to work properly, your copy of PTC Creo Simulation Extension — Floating License w/ 1-Year Gold Support requires Creo 1.0 and/or
PTC Creo Parametric
PTC Creo Parametric Essentials2D/3D CAD Design, Multi-CAD Collaboration and Direct Editing (FMX). Includes required 1st year Support.7,4957,345Add to Cart Product 12740
or
PTC Creo Parametric
PTC Creo Parametric Essentials Plus w/ PDM EssentialsEssentials and PDM for extended collaboration and data management. Includes required 1st year Support.8,6958,519Add to Cart Product 12743
or
PTC Creo Parametric
PTC Creo Parametric Essentials Premium w/ PDM EssentialsEssentials Plus and Functionality for CAE and Routed System Design. Includes required 1st year Support.12,56512,309Add to Cart Product 12746