NovedgemadCAMRequest Custom Quote

madCAM 6.0 Level 5X

madCAM 5X: 5-Axis 3D Toolpath Creator - Mould and Die CAM Plug-in for Rhino 6.

madCAM 6.0 Level 5XmadCAM 6.0 Level 5X is the 3D CAM plug-in for Rhinoceros which gives the ability to perform both modeling and toolpath creation inside Rhino 3D. madCAM 6.0 Level 5X is perfect for 3D CAM for CNC-milling machines. All menus for controlling madCAM 6.0 Level 5X and generated toolpaths are inside Rhino 3D and stored together with your model.
Developed for toolmaking (Mould And Die) as well as for prototype productions, madCAM 6.0 Level 5X generates a non- collision toolpath with excellent cutting action. Where demand for accuracy and perfect surface smoothness is required, madCAM 6.0 Level 5X is the 3D [[Computer- aided_manufacturing|CAM]] plug-in of choice.
madCAM 6.0 Level 5X is meant for the NC-operator who demands an easy-to-use and efficient system. It facilitates effective manufacturing in a short period of time. The operator is provided with clarified results of chosen parameters. madCAM 6.0 Level 5X handles all 3D models that Rhino 3D handles and is able to generate NC- codes to all kinds of 5-axis milling machines. A built-in post processor is adaptable for different kinds of controlling systems.

Key Features and Benefits

Roughing
Removes all the unnecessary material from the workpiece in an effective way. madCAM 6.0 Level 5X cuts the part in z-levels. The operator can choose a ramp angle to create a smooth approach of the cutter after every retract and traverse.
Finishing
Gives the final surface finish of the part. madCAM 6.0 Level 5X effectively calculates cuts for both planar and z-level finishing. The operator controls the limit with an angle for relatively horizontal and relatively vertical surfaces. The limit is calculated from the surface normal.
Remachining
This method offers an opportunity to remove material that remains where the previous cutter could not reach due to size of cutter. madCAM 6.0 Level 5X has strategies for removing material calculated from the true stock model, inside boundary curves and with surface dual contact (pencil trace).
Curve Milling
This includes methods for machining from curves. The curve milling offers opportunities for Engraving and strategies for toolpath projection inside boundary curves and between two curves.
2 1/2 D Machining
This includes methods for machining from curves or surface edge curves. Profiling, Pocketing, Facing and Drilling.
madCAM 6.0 Level 5X includes:
2 1/2 axis Milling
  • Profiling
  • Pocketing
  • Facing
  • Drilling
  • Engraving
3 axis Milling
  • 3 axis Milling
  • Z-level Pocketing
  • Z-level Facing
  • Parallel Roughing
  • Z-level finishing
  • Planar finishing
  • Pencil Tracing
  • Surface angle limit control
  • Along Curves
  • 5Xtraject curves
  • Between two curves
  • From boundary curves
  • 3-axis Tool holder collision simulation
  • Customizable post processors
  • Box work piece
  • Region Curves
  • Tool path Clipping planes
Toolpath editing
  • Edit as ordinary Rhino curves
  • 3-axis Material removal simulation
4 axis Milling
  • Planar contour finishing
  • Roughing from 3D Stock Model
  • Indexed 3 + 1-axis
  • Simultaneous 4-axis Profiling
  • Simultaneous 4-axis Pocketing
  • Simultaneous 4-axis Facing
  • Simultaneous 4-axis Radial-level Pocketing
  • Simultaneous 4-axis Radial-level Facing
  • Simultaneous 4-axis Parallel Roughing
  • Simultaneous 4-axis Radial-level finishing
  • Simultaneous 4-axis Planar finishing
  • Simultaneous 4-axis Planar contour finishing
  • Simultaneous 4-axis Pencil Tracing
  • Simultaneous 4-axis Along Curves (Engraving)
  • Simultaneous 4-axis Project curves (Engraving)
  • Simultaneous 4-axis Between two curves
  • Simultaneous 4-axis From boundary curves
  • Simultaneous 4-axis Roughing from 3D Stock Model
5 axis Milling
  • Indexed 3 + 2 axis
  • Simultaneous 5 axis from axis of revolution

This Product is Also Known As

  • madCAM Level 5X

  • madCAM 5X

  • madCAM 5X for Rhino

Compare madCAM VersionsOpen Table
959
1,805
1,629
1,629
2,899
5,799
2 1/2 axis Milling
Profiling
Pocketing
Facing
Drilling
Engraving
V-carving
3 axis Milling
Z-level Pocketing
Z-level Facing
Parallel Roughing
Z-level finishing (Water line finishing)
Planar finishing
Planar contour finishing
Pencil Tracing
Surface angle limit control (Steep or flat surface machining)
Along Curves (Engraving)
Project curves (Engraving)
Between two curves
From boundary curves
Roughing from 3D Stock Model
Re-roughing
Z-level remachining
Planar remachining
Contour remachining
V-carving
4 axis Milling
Indexed 3 + 1-axis (Including all madCAM toolpath functions)
imultaneous 4-axis Profiling
Simultaneous 4-axis Pocketing
Simultaneous 4-axis Facing
Simultaneous 4-axis Radial-level Pocketing
Simultaneous 4-axis Radial-level Facing
Simultaneous 4-axis Parallel Roughing
Simultaneous 4-axis Radial-level finishing
Simultaneous 4-axis Planar finishing
Simultaneous 4-axis Planar contour finishing
Simultaneous 4-axis Spiral finishing
Simultaneous 4-axis Pencil Tracing
Surface angle limit control (Steep or flat surface machining)
Simultaneous 4-axis Along Curves (Engraving)
Simultaneous 4-axis Project curves (Engraving)
Simultaneous 4-axis Between two curves
Simultaneous 4-axis From boundary curves
Simultaneous 4-axis Roughing from 3D Stock Model
Simultaneous 4-axis Radial-level remachining
Simultaneous 4-axis Planar remachining
Simultaneous 4-axis Contour remachining
Simultaneous 4-axis V-carving
5 axis Milling
Indexed 3 + 2 axis (Including all madCAM toolpath functions)
Simultaneous 5 axis from axis of revolution (Including all madCAM toolpath functions except re-roughing)
Simultaneous 5-axis Drive Surface Offset-level Pocketing
Simultaneous 5-axis Drive Surface Offset-level Facing
Simultaneous 5-axis Drive Surface U-V Roughing
Simultaneous 5-axis Drive Surface Offset-level finishing
Simultaneous 5-axis Drive Surface U-V finishing
Simultaneous 5-axis Drive Surface border contour finishing
Simultaneous 5-axis Closed Drive Surface spiral finishing
Simultaneous 5-axis Drive Surface Pencil Tracing
Simultaneous 5-axis Drive Surface angle limit control
Simultaneous 5-axis SWARF Profiling from surface edge curves
Simultaneous 5-axis Profiling perpendicular to surface
Simultaneous 5-axis Part trimming from curves and vectors
Regions and Boundaries
Box work piece
Region Curves
Tool path Clipping planes
User defined 3D stock models (Except simultaneous 5-axis drive surface)
Drive Surface calculation height and depth option
Regions from drive surface borders (trim curves)
Drive Surface tool path clipping levels option.
Simultaneous 5-axis vertical angle limit option
Toolpath editing
Transform and copy as ordinary Rhino curves
Simulation
3-axis Material removal simulation
3-axis Tool holder collision simulation
4 axis machine parts simulation
5-axis machine parts simulation
Custom machine
4-axis machine setup
5-axis machine setup
Custom STL files support for machine parts simulation
External DLL support for machine kinematics
Custom machine
Customizable post processors
4-axis output
5-axis output
5-axis APT output

Installation Requirements

In order to work properly, your copy of madCAM 6.0 Level 5X requires :
McNeel
Rhino 5.0 for WinRhino 5 is still available for your convenience. Be aware that Rhino 6 has been released.99581499Add to Cart Product 1042
or
Promo
McNeel
Rhino 6.0Rhino 3D with Grasshopper: The most powerful NURBS 3D CAD modeling tool with full support from McNeel. Now with Grasshopper.995795Add to Cart Product 2217
Customers Who Bought This Item Also Bought
Pixologic
ZBrush 2018ZBrush 2018: the all-in-one 3D Digital Sculpting Solution Designed For The Pursuit Of Art895758Add to Cart Product 3180
TDM Solutions
Clayoo 2.6Clayoo: The latest and most advanced organic 3D modeling. It's a Rhino 6 plugin.795755Add to Cart Product 7441
EVO
CAMback StandardMachine Networking and DNC1,4901,415Add to Cart Product 1808
EVO
CAMback EasyNC data transmission & effective NC data management440420Add to Cart Product 1715
MecSoft
RhinoCAM 2019 MILL XpressRhinoCAM Mill Xpress: 2 and 3 axis machining methods for hobbyists, makers and students595Get a Quote Product 13640
MecSoft
VisualART 2019Convert any 2D artwork into geometry suitable for machining!500Get a Quote Product 3122
madCAM 6.0 Level 5X
2,899
96 OFF
(3)Authorized
Reseller
Request a Competitive
Quote by eMail Now
Best Price
Guarantee
madCAM 6.0 Level 5X is covered by the Novedge Best Price Guarantee.
We guarantee that our price is the lowest price you'll find anywhere online. And if you happen to find a better price online, and meet our Best Price Guarantee Terms & Conditions, we'll refund you the difference up to $500.
Available in US, Canada, Australia & New Zealand